To contact this candidate email hr6@falconmsl.com
SUSAI MARK BIBIAN
- Mechanical Technician
- Profile Created Date:29 Mar 2020
Description
SUMMARY
Over years of experience as Mechanical Technician in Maintenance of Static and Rotary equipment in Oil and Gas field. Have good technical knowledge of Heat Exchangers, Column, Vessels, Valves, Pipelines, Pumps, Compressors, Heat Engines, fans, blowers etc.
TOTAL OIL & GAS FIELD EXPERIENCE (Above Years)
Reputed Company THROUGH RELIANCE MECHANICAL TECHNICIAN Aug to till date MUMBAI
ORYX GTL THROUGH QCON MECHANICAL TECHNICIAN Feb to May QATAR
SPECTRON ENGINEERS MECHANICAL TECHNICIAN Sep to Oct RAJASTHAN
RESPONSIBILITIES
- Perform and participate in the preventive, corrective and troubleshooting maintenance activities of the plant mechanical equipments in the assigned areas
- Troubleshoot, identify and isolate faulty components of plant mechanical equipment at the assigned location.
- Identify spare parts required for maintenance work, from manufacturers’ drawings and spare parts lists.
- Perform shutdown maintenance repair and overhaul on the Mechanical equipment.
- Participate in condition monitoring checks on machinery, and notify any malfunctions or defects to the immediate supervisor.
- Be a member of the Engineering Emergency & Fire Backup hour roster team, for safety support duties.
- Attend Toolbox meetings to establish scope of work activities such as safety requirements permits to work, special tools and materials.
- Comply with all company Health, Safety and Environment as well as Work Permit, policies and procedures.
Centrifugal / Reciprocating Pumps:
Overhauling of all types Heavy Rotating Centrifugal /Reciprocation Pumps (SULZAR, GOUDS,) (Single / Multi Stage) Taking or Regular Maintenance of Pumps, (Weekly, Monthly, Annual). Trouble Shooting, Alignment, Dismantle, and Assemble of Pumps. Impeller clearance settings, Changing of Mechanical Seal, Bearings, Gland packing, Fin Fan coolers etc....
Heat Exchangers
- Maintenance jobs carried out in Heat exchangers of Fixed, Floating and U tube type, which include activities right from blinding, bundle pulling, cleaning, testing, repair works as per the instructions.
- Having experience in plate type, shell and tube (single and multi-tubes) exchanger. Involved in maintenance and repair of tubes, nozzle baffle plates, etc.
- Hydro testing, Pneumatic testing such as shell testing, tube testing and final testing.
Valve
- Service and operation inspection of all types of valve like Ball valve, Control Valve, Globe valve, Gate valve, Butterfly valve, Diaphragm form valve, non-return valve, Non-Return Valve Automatic Pneumatic Actuators control valve in utility department. Valve body leak testing, Valve seat leak testing, Safety valve pressure setting.
Tower and Vessels
- Maintenance jobs carried out in towers which includes activities like removal of trays, demisters, Packing (Pall rings, Racing rings etc.), through, trays cleaning.
- Maintenance jobs carried out in Tanks (Fixed & Floating roof) which include activities like, stream coils, servicing of rim vents, auto bleeder vents, Replacement of primary/Secondary seals, Weather shield plates, Shoe plates etc.
- Maintenance jobs carried out in absorber & vessels, which include activities like cleaning, catalyst renewal, Demister removal etc.
Separator
- Having experience in phases and phase (horizontal, vertical, Sphere) separator maintenance to change mist pad, vertex breaker, coalescing plates, deflected etc. Involved in startup shutdown and commissioning procedure all type of separators.
- Done hydro test and pneumatic test as per the procedure and pressure.
Pumps
- Dismantling and reassembling of all centrifugal and reciprocating pumps i.e. single and multi-stage, vertical and horizontal type. Piston pumps, chemical dosing pumps, Methanol Injection pump, etc.
- Involved in repair such as plunger changing, activities such as mechanical seal assembling and aligning the pump with Rim and Face method, Dial Indicator.
- Overhauling the Pumps and Pump Bearings, Pump flanges and shaft alignment, Shaft sleeves and flange settings and moving parts alignment.
- Change the Pump Casings, Impellers, Check the water and oil leakage of the Bearing shaft seals,
Check, replace the shaft, and Pump packing
Nationality : India
Residential country : india
Date of birth : 02-12-1996
Address : NO./, RC Church Street
Language: English
Language Known
Tamil
Skills
- Overhauling air and gas compressor both rotary as well as reciprocating, maintaining the required clearance for piston ring gap.
- Changing gas seal cups, bearing, suction and discharge valves as well as maintenance of lube oil circuit and coolers.
- Rim and face Method
- Laser Alignment
- Reversed base method
- Applying and closing of permits
- Daily, Weekly, Monthly reports are prepared and submitted to superiors.
- Experience in Hydro test and pneumatic test of all valves, pipes, and vessels pressurized by high pressure pump. To set the operation pressure and waiting minutes, check the leakage. If the leakage occurs through the flange, tight the Flange and continue Retest
Compressor
Pump Alignment Checking
Shaft alignment checking of Compressor, Pumps, Turbine
Maintenance Record and Ptw System
To align the pump and motor using Rim and Face method (Radial, Axial) as well as Reverse Alignment.
Using proper fittings, clamps including magnetic clamps, spacer (shim) and get the accurate result, .mm to .mm. Dial indicator alignment.
Hydro & Pneumatic Testing
Safety Devices
Familiar with handling of Safety Equipments, H S Monitor, Gas Detector, Breathing Apparatus, Fire detection systems (U.V. Sensors, Fusible Plug etc.,) and Fire Extinguishes.
Education
-
0000
Diploma from PLP Donbosco Institution University
-
India
Career
-
08/2016 - /
Position: MECHANICAL TECHNICIAN
Employer: Reputed Company
Country: India
-
02/2016 - 05/2016
Position: MECHANICAL TECHNICIAN
Employer: ORYX GTL
Country: Qatar
-
09/2014 - 10/2015
Position: MECHANICAL TECHNICIAN
Employer: SPECTRON ENGINEERS
Country: India
certificate
-
STCW
01-01-70 To 01-01-70