-Represent the operator at the rig site and ensure compliance with the drilling program. -Lead and supervise all well site operations (drilling, tripping, casing, cementing, logging, testing). -Ensure full compliance with HSE rules, PTW system, and safety procedures. -Conduct and enforce toolbox talks, JSAs, and risk assessments. -Monitor well conditions (flow, pit volume, ECD, torque, drag, gas) to prevent well control incidents. -Ensure well integrity and correct execution of the well design. -Coordinate and manage all contractors and service companies on the rig. -Optimize drilling performance and minimize non-productive time (NPT). -Control operational costs and avoid unnecessary activities or delays. -Ensure all equipment is tested, certified, and fit for purpose (BOP, well control, critical tools). -Prepare and submit accurate daily drilling reports and operational updates.

Implement and enforce safety protocols and procedures to minimize risks and ensure compliance with OISD and DGMS regulations.  Conduct regular safety inspections and audits to identify potential hazards and implement corrective actions.  Develop and maintain comprehensive HSE management systems for onshore drilling operations.  Manage and coordinate emergency response plans, including H2S, fire, pit, and well control.  Oversee permit to work systems for critical drilling operations and ensure compliance with regulatory requirements.  Monitor and report on drilling-specific safety parameters and rig safety compliance.  Conduct SIMOPS, HAZOP, and drilling-specific safety assessments to identify potential risks and implement mitigation measures.  Collaborate with drilling teams to develop and implement safe operating procedures and guidelines.  Provide training and guidance to drilling personnel on safety procedures and protocols.  Investigate incidents and near-misses, and implement corrective actions to prevent recurrence.  Conduct risk assessments and enforce preventative measures in place prior to starting activities.  Perform onsite audits to ensure regulatory compliance, and conduct investigations.  Inspect premises and the work of personnel to identify issues or non-conformity (e.g. not using protective equipment and statutory compliances). Enforce safety guidelines and train personnel on emergency response procedures.

Ct supervisor Job expertise in milling ,N2 kick off, logging,clean out ,setting retrieve plug, mechanical logging,cement,stimulation,cat 1, cat 2 well with 1.5,1.75,2,2 3/8 CT Having offshore and onshore site in rig and rigless sites experience. V operations, managing the crew, equipment (like the injector head and reel), and job execution for well interventions, ensuring strict safety (HSE) compliance, technical precision, and efficiency from setup to demobilization, acting as the key link between field operations and management/clients. They handle planning, risk assessment, crew training, equipment maintenance, troubleshooting, and ensuring well control throughout the project. Key Responsibilities Operations Management: Oversees the entire job, from rigging up/down equipment, operating the CT unit, and performing calculations. Safety Leadership: Conducts pre-job safety meetings, enforces HSE policies, and performs risk analysis to protect personnel and the environment. Personnel & Crew Management: Supervises, trains, and evaluates the CT crew, ensuring they follow procedures and maintain professionalism. Technical Expertise: Troubleshoots issues, ensures equipment functionality, manages materials, and performs necessary well control calculations. Client & Stakeholder Relations: Manages customer satisfaction, coordinates with engineers, and maintains positive site interactions. Reporting: Completes accurate field paperwork and may handle data collection/distribution. . . . . . . . ..... V . Vv. . . Vv vv. Vv.

Please find the attached Curriculum Vitae for your favorable consideration. I have 16 years of experience in QHSE Field working in different specializations of the construction industry which includes Metro Oil and Gas field,Buildings, Roads etc I believe my experience combined with my qualification will stand me in a good chance for an interview.Please find the attached Curriculum Vitae for your favorable consideration. I have 16 years of experience in QHSE Field working in different specializations of the construction industry which includes Metro Oil and Gas field,Buildings, Roads etc I believe my experience combined with my qualification will stand me in a good chance for an interview.Please find the attached Curriculum Vitae for your favorable consideration. I have 16 years of experience in QHSE Field working in different specializations of the construction industry which includes Metro Oil and Gas field,Buildings, Roads etc I believe my experience combined with my qualification will stand me in a good chance for an interview.

Currently i am working as MPD Drilling Engineer, providing onsite and office support to coustomer. My role ranges from job planning to safely execution and evaluation. Prepare Planning Feasibility Report, Drilling Program, Operational risks, End of Well Reports, Cost and AFE Calculation and Tender Documents. Demonstrate strong working knowledge of operating and contingency SOPs, supervising their execution to ensure safe, efficient, and compliant operations. Maintain underbalanced well conditions by optimizing pump rates, N₂, Foam and H2s scavengers’ injection rates. Maintain continuous communication with the base office technical advisor to ensure alignment on operational performance and real-time decision-making. Utilize WellFlo multiphase flow software to calculate liquid, gas, and mixed-phase velocities, ensuring effective hole cleaning and advising stakeholders on any operational concerns. Assist Sales, Operations, and Product Engineering teams in managing their everyday responsibilities. Prepare Hydraulics simulations, Well Control Matrix, Procedures, provide onsite and office support for MPD, UBD, NBD and Air Drilling operations Prepare kick response scenarios and MPD well control matrices based on system capabilities Design P&IDs and flow diagrams for MPD piping, valve and cross overs. Participate in Job risk analysis (Customer DWOP), HSE & Service Quality communication with customers

Plan and execute field operations as a lead hand in Open and Cased hole fishing, running whipstocks, casing cut and pull, casing milling, section milling and Coil Tubing Milling operations. As a Lead Drilling Product Engineer, I have been involved in enhancing drilling performance by improving bit designs and reducing NPT through technologies as CWD, Under-reamers and other Downhole tools. I am well versed in offset well analysis to benchmark field performance and improve efficiency by minimising ILT in operations. Executed several benchmark projects in India with ONGC, OIL and Cairn. Carried out Kuwait’s first dual casing whisptock sidetrack through 9-5/8” and 13-3/8” casing in a single trip. Also executed the first non-directional casing while drilling project in Shuaiba field under SLB LSTK banner.

Mechanical Engineering, Some equipment testing,Safety protocol, Asme Code Etc and some responsibility handling martial arrengment , and pre documents overall active done and more than 50 to 60 Equipment handling, good knowledge about technicians problem solutions and any other response the good behaviour people and tbt knowledge about Thaher more important topic and any critical problem solutions good and humans people that most important and most hazard,Risk,Control that is most important part of oil and gas project. I m handling more than 15 years good term work for each paln for my side thane can any problem slovenly for many static equipment Exchanger,Column,Vessel,Valves etc equipment good knowledge very important topic to discs tha part of my life and good knowledge about rotating equipment

In my experience as an Instrument Technician, I am responsible for the installation, calibration, maintenance, and troubleshooting of field instruments and control systems in an industrial plant environment. I work with pressure, temperature, flow, and level transmitters, control valves, switches to ensure accurate and reliable process measurement. I regularly perform preventive and corrective maintenance activities, including loop checking, functional testing, and commissioning during plant start-ups and shutdowns. I interpret P&IDs, loop diagrams, wiring drawings, and datasheets to execute jobs safely and correctly. Troubleshooting instrumentation faults in PLC, DCS, and field devices is a key part of my role to minimize plant downtime. I strictly follow safety rules, permit-to-work systems, and lockout/tagout procedures, especially in hazardous areas. I coordinate closely with operations, mechanical, and electrical teams to resolve issues efficiently. Maintaining calibration records, maintenance reports, and job documentation is also part of my responsibility. Overall, my role ensures safe plant operation, process reliability, and compliance with quality and safety standards through effective instrumentation support.

Seasoned QHSE Advisor with over 19 years of onshore and offshore experience in the Oil & Gas, Seismic and Solar/Renewable Energy industries. Proven expertise in developing and implementing QHSSE Management Systems, Risk Assessment protocols, and IOGP and ISO compliance initiatives Skilled in leading cross-functional teams to achieve optimal safety performance, reduce incidents, and enhance operational efficiency. Adept at fostering a proactive safety culture and aligning HSSE strategies with organizational goals to ensure regulatory compliance and sustainable operational excellence High communication skills, Hard worker, Creative, Cooperative, Teachable, Presenter, Popular and Respectable, Result, and Quality-oriented. Strong commitment and leadership skills Strong administrative and organizational skills Ability to multi-task and work to tight deadlines Professional work attitude and appearance Strong motivation, Strong-planning skills, be able to pay attention to details, Technical awareness in the Oilfield Business. Experience in managing a large number of laborers from different cultural backgrounds

To handle operation, manage people,to manage workshop and warehouse .Mobilisation and demobilisation equipment services and personnel to rig, training personnel, handle new project, meet customer.Training personnel, to prepare tendering,.To make maintenance dan modification equipment, Rig inspection, rig survey, preventive maintenances To order material/ spareparts, to follow training.To make daily report.To run equipment on the rig.Rig up and rig down To install casing expandable on the rig and to make final report.To follow drilling work on paper.To call third parties for lifting gear inspection .To make assessment for personnel.Follow icwf well control training.To make tender evaluation To make tender for minimum equipment requirement To inspect equipment and material. To make technical proposal

- Composing well design and program for drilling/completion/well intervention campaign and overseeing AFE monitoring & closeout process. - Prepared technical scope of work, tender strategy, and technical qualification assessment for drilling and completion material and services contract. - Contributed for FEED Study of Offshore Heavy Oilfield Development in drilling & completion (Open Hole Gravel Pack) strategy & operational aspects and collaborate with subsurface and project team - Supervised well integrity job during platform reactivation for future well intervention campaign using HWU and Slickline unit - As Drilling Spv to manage Jack-Up 3000 HP drilling rig operations efficiently and ensure compliance with safety & align with program objectives. Focal points for any operational issues, MOC and Risk Assessment during critical drilling operations.

Acted as Person in Charge (PIC) for personal and equipment safety on rig Enforcing HSE Management System, PTW, and toolbox talks Led daily morning meetings and pre-job safety meetings Prepared accurate daily drilling reports using OpenWells Managed drilling materiel, logistics, and equipment to control cost Oversaw preventive and corrective maintenance of rig equipment Identified high-risk operations and implemented preventive control Maintained 24/7 wellsite availability during drilling operations without lost time incidents Successfully managed high-risk operations including lost circulation, stuck pipe and fishing jobs Delivered wells under challenging geological conditions while meeting safety and schedule targets Bit Sizes: 36”, 26”, 17”1/2 or 16”, 12”1/4, 8”1/2 and 6” Bit Types: PDC, Rock bit, Diamond bit & core heads Casing Sizes: 30”,18”5/8,13”3/8,9”5/8 and 7” Liner operations 4”1/2 and 7” hydraulic & mechanical liners Tie-back 7” liner with Tie-back sleeve Cementing: Primary cementing, plugs, squeeze jobs Testing: SBT, FIT and LOT DST open & cased hole coordination Standard fishing tools and operations Mud system: OBM & WBM Tools: RSS, PDM, Turbo-drilling, MWD, Rotary table and top drive

Worked at different sites of Saudi Aramco both onshore and offshore. Worked as supervisor during rig up and rig down of Solids Control equipment I have experience about all drilling operations and have experience of jack up rigs on offshore. I worked under pressure and also did my job alone on many projects. I have bachelor's degree in Chemical Engineering with 12 years experience in solids control and drilling waste management. Worked as Field operator on different sites in Pakistan. I have 11 years experience of both onshore and offshore with bachelor's degree in Chemical Engineering. I have experience in operating shale shakers, centrifuges, brine filtration, skip and ship on offshore and handling drilling waste safely and efficiently. I am hardworking, flexible and ready to join immediately.

I possess a comprehensive portfolio of certifications in Quality Management and Health, Safety, and Environment (HSE), complemented by extensive hands‑on experience in the oil‑and‑gas drilling sector. Over the years I have contributed to leading organizations such as Weatherford, Parker Drilling, and ITS International, where I applied rigorous quality assurance protocols, developed and executed HSE programs, and ensured compliance with industry standards and regulatory requirements. My background includes managing audit cycles, leading incident‑investigation teams, and driving continuous‑improvement initiatives that enhance operational efficiency and safety performance. Please find my attached résumé, which provides a detailed account of my certifications, professional achievements, and the breadth of experience I can bring to your team.

Worked as a well testing senior technician in the oil and gas well testing jobs: DST, Flow back, Inline test, EPF (Early Production Facility), Rig less, Clean up.  Prepare Job reports, daily reports, job logs.  Conduct safety meetings, Tool box talk and Risk assessment.  Preparing full surface well testing packages before job, and the maintenance required after the job.  Performed spotting equipments, Rig up/ Rig down.  Handled the process applications in DCS/ SCADA systems (EDGEX EXPRO, SCANDAS, HART Communication, RPT6 Halliburton, MS office).  Installing data acquisition equipments.  Electromagnetic turbine flow meter rate calculation (CMSF, MF, SHF, Q).  Review technical data and P&ID drawings.  Installing Ignition system and doing its maintenance.  Lab analysis: surface sampling, Gravities (water, oil, gas), Shrinkage, Salinity, BSW, Ph, CO2, H2S.  Chemical injection calculations (rate, consummation).  Installing ESD system and doing all its maintenance

Dear HR/Recruitment I would like to apply for the position you are currently advertising, I believe I have all the skills knowledge and experience you are looking for. I have a willingness to progress, ensuring I would be an asset to your team, installing a high level of performance and ensuring efficiency within the workplace. I am open to ideas on exciting and challenging opportunities. During my working career I have held roles in varying levels of responsibility and look forward to gaining and transferring my skills, knowledge and experience into any similar related employment where I can strengthen and develop my knowledge to further the career I enjoy, hopefully passing on any skills and knowledge that may help the company or work collaeagues develop a new or efficient approach. I am a versatile, determined, highly motivated and very experienced individual who is looking for that permanent opportunity to help progress my career with a large organisation like yours. I have experience planning and following processes as required. Experience working in a fast-paced high-pressure environment with the ability to consistently meet deadlines with the highest quality whether that be working solo or as part of a team. I am also dedicated, competent, reliable and professional always. With my drive, determination and enthusiasm, I bring positivity and energy to the workplace and have proved an ability to work well in a team, being open to everything that is thrown at me. I am well organised with an excellent attitude to work, with a proven track record and ability to adapt to new situations, confidently and efficiently, as they arise. I have a flexible approach to work, exemplary interpersonal and communication skills and am willing to apply myself fully to any challenge. My key skills include, communication skills, analytical, planning my own workload and meeting deadlines, flexible and adaptable and most importantly eagerness to learn and develop my skills further. I feel that I could best present myself by interview (even if informal), but I have also enclosed a copy of my curriculum vitae for your consideration. I look forward to hearing from you. Yours faithfully, Kevin Irvine

1. Manage and supervise all stages for all types of workover rig operations such as: Maintenance, Safety, Completion, Temporary & Permanent Abandonment following the procedures as per Company's requirements. 2. Direct and coordinate the preparation of well services and well integrity policies, guidelines, procedures and standards. 3. Design well completion string and completion material and services. 4. Lead well services team to execute operations safety and quality control. 5. Establish and manage contracts such as Workover, well completion, well testing, Slick line, Electric line, Coiled tubing, Pumping and N2 unit. 6. Responsible for preparation of all completion sub-assemblies, associated equipment, running list, and fishing tools, as well as ensuring all equipment is available and tested prior to running the well completion and workover operations. 7. Technical Support and Co-ordinate for related contract tenders, bid evaluations and contract management including audits. Inspected and qualified vendors, in collaboration with Procurement and contract Group. 8. Technical support of completions and workover operations onshore. 9. Preparing Workover, completion, coiled tubing and slickline programs. 10. Conduct Analysis, investigations and provide engineering recommendations in accordance with API and NORSOK International Standards. 11. Perform necessary investigations to be conducted following the wellhead audit such as Slick line (Calibration, top sediment, PFS, etc...), Logging (MFC, MDT, PLT, thermometry, Video camera, etc...). 12. Define the safe operating envelope (MAASP & MAWOP) to ensure that wells operate safely for the full design life based on laboratory analysis of annuli fluids, corrosion reports, cased hole log analysis and the evaluation of annuli pressures.

 Member of a team that worked with other engineers, rig supervisors and supplies by providing them with adequate well completion design procedures and technical support during execution phase.  Experience in documenting receipts, taking records of supplied materials and equipment. Review service company field tickets for accuracy of services provided and associated charges.  Able to Makes recommendations on alternative methods or equipment when unusual situations are encountered.  Experience in rig Supervisions and able to oversee all operations performed.  Experience in running multiple applications of Wellbore Intervention such as wellbore cleanout, cement squeeze operation, and straddle patch.  Experience in setting whipstock in open/cased hole, fishing, plug & abandonment and section milling for sidetrack wells.  Experience in remedial and stimulation (Retrievable bridge Plugs / service packers and wireline bridge plugs) and Thru Tubing Intervention (Thru tubing packers and Screens).  Experience in Wireline Cased Hole and Open ole Operations.  Experienced in Cement Bond Logs Operations and Logs interpretations (Gamma, Resistivity, Density, Neutron Porosity, CBL, Delta Rho, Caliper, Temperature, ECD).  Providing front-line support to customer and accurately delivering all paperwork prior to or upon completion of job.  Participated in training programs of well completions such as well design, well control, perforations, stimulations and well optimizations.  Experience in general knowledge of drilling, completion techniques and drilling/work over rig operations.  Experience in field operations with Wireline, Slickline, and Coiled Tubing.  Strong customer engagement, ability to work and communicate with operations team.  Conducting all business activities in accordance with Baker Hughes HSE policies, Legal Compliance requirements and Baker Hughes Core Values.  Monitor financial performance of operating budgets and capital programs.

These *Solids Control Engineer:* As a Solids Control Engineer, my primary responsibility were to design, operate, and maintain equipment and systems that control and manage drilling solids in drilling operations. My key roles include: - Designing and implementing effective solids control systems to optimize drilling performance and minimize waste - Operating and maintaining equipment such as shale shakers, centrifuges, and mud cleaners to ensure efficient solids removal - Monitoring and analyzing drilling fluid properties and solids content to optimize treatment and minimize costs - Troubleshooting equipment issues and implementing repairs or modifications as needed - Collaborating with drilling teams to optimize drilling performance and minimize environmental impact *Maintenance Engineer:* As a Maintenance Engineer, my primary responsibility were to ensure the reliability and efficiency of equipment and systems in drilling operations. My key roles include: - Developing and implementing maintenance schedules and procedures to prevent equipment failures - Conducting routine inspections and maintenance activities on equipment such as pumps, motors, and gearboxes - Troubleshooting and repairing equipment issues to minimize downtime and optimize production - Collaborating with operations teams to identify and prioritize maintenance needs - Implementing reliability-centered maintenance practices to improve equipment reliability and reduce maintenance costs *Field Operator:* As a Field Operator, my primary responsibility were to support drilling operations and ensure the safe and efficient operation of equipment and systems. My key roles include: - Operating and monitoring drilling equipment and systems, such as mud pumps, generators, and rig systems - Performing routine inspections and checks on equipment and systems to identify potential issues - Assisting with maintenance activities, such as equipment repairs and replacements - Collaborating with other teams, such as drilling and maintenance, to ensure smooth operations - Following safety procedures and protocols to ensure a safe working environment for yourself and others.

Safety Induction course to every new arrival on Rig. Weekly training to personnel about donning and doffing of BA sets, Properties and characters of H2S, using of air loop system, Evacuation of victim and First aid during emergencies. Knowledge of SCOTT air supplied products, technical maintenance and overhaul. POSI CHEK for 15 and 30 minutes SCBA. Familiarize and remain cognizant of all drilling activities, which could produce an H2S release. During activities that have potential for H2S release, provide continuous monitoring with H2S personal Detector Tubes and check in open air by using detector tubes. Identification of potentially Hazardous area for critical inspection. Daily reporting, Drills Conduct reporting & Drills as per Schedule. Collect STOP cards & Issue STOP cards. Minutes of meeting, Discuses HSE related issues & maintain Records. Update scorecards, DWLTI board within the primary muster points & DWLTI board update daily basis. Submit report for scorecard to the foreman, Secretary & HSE advisor. Preparing incident and accident reports, Incident & Accident investigation Reporting & make recommendations to fix the hazard. Conduct and assess audits and inspection reports and findings of all safety, lifesaving, emergency equipment, material, fire protection and prevention. Monitoring Critical Activities at site & correct the unsafe practices on the spot. Provide necessary instructions to work force in maintaining good housekeeping & proper waste disposal. Check and test of gas in Environment. To protect Hearing and Eye from all circumstances. Safety Induction course to every new arrival on Rig & maintain new arrival logbook.