• Perform laboratory testing and quality assurance for cement and drilling fluids in accordance with API standards. • Conduct cement slurry evaluations including thickening time, compressive strength, free water, and rheology analysis. • Carry out drilling fluid (mud) testing such as density, viscosity, gel strength, and fluid loss. • Prepare and review technical laboratory reports to support drilling and cementing operations. • Calibrate, inspect, and maintain laboratory equipment to ensure accuracy and reliability of test results. • Ensure full compliance with HSE and quality assurance procedures during all laboratory activities. • Support field engineers by providing accurate test data and technical recommendations under high-pressure operational conditions. • Train and supervise junior laboratory technicians on testing procedures and safety practices. • Collaborate with multidisciplinary teams to improve testing efficiency and operational performance.

Sterling Oil Exploration & Energy Producing Company Mechanical Engineer – Captive Power Plant Projects (Jan 2025 – Present) Supervised steel structural erection for turbine halls, pipe racks, and auxiliary systems. Directed installation and alignment of gas turbines (Frame type/GE/Siemens) and steam turbines, ensuring precision within engineering tolerances. Led the erection of Heat Recovery Steam Generators (HRSGs) including pressure parts, ducts, drums, and auxiliary equipment. Coordinated mechanical works for captive power plant systems including piping, pumps, compressors, and cooling towers. Oversaw routine and major maintenance activities on turbines, HRSGs, and rotating equipment to ensure reliability and efficiency. Worked closely with EPC contractors, OEM representatives, and QA/QC teams to meet project specifications and timelines. Ensured compliance with HSE policies, conducting toolbox talks, risk assessments, and site inspections to eliminate hazards. BUA GROUP (LASUCO) LAFIAGI KWARA STATE Jan 2023 to Dec 2024 Assistant Mechanical Manager (Boiler Engineer): Interpretation of mechanical designs and drawings. Supervises erection and installation of boilers and Steam/Gas Turbine, heat exchangers, Chillers, and Pollution control equipment. Ensuring proper project planning. Supervision and guidance on the steel erection structural work. Supervises maintenance and installation of machineries and equipment. Supervises welding and fabrication work on site. AFRICAN NATURAL RESOURCES AND MINE LIMITED GUJENI KADUNA STATE Feb 2022 to Jan 2023 Shift Engineer operation and maintenance Turbine/Boiler/WTP: Supervises steel structural erection work of power plant. Supervises erection and installation of Waste Heat Recovery Boiler((WHRB) and Condensing Extraction Turbine and related equipment. Prepared and supervised commissioning of boilers, Turbines, Chillers Condensers etc. Reponsible starting, operating and shutting down of Steam/Gas Turbine (STG) System, boiler and Demineralization plant in a logical efficient and safe manner on DCS. Operate engine control system, electrical generators, and electric plant control equipment from DCS or local operating stations or switch boards. Adjust Turbine Steam controls on DCS to generate specified electrical power. Performed maintenance on steam Turbine and check procedures on power supply. Filling Operation data on log book for reference purpose. Inspected, identified and replaced faulty component of the Gas Turbine engine. Good understanding of Turbine auxiliary equipment like lube oil system, starter system, and filter valves etc. DCS Engineer Boiler (WHRB) and Turbine (condensing extraction type and back pressure impulse Turbine type). Performed preventive maintenance on control and monitoring circuits. Coordinating and supervising the entire activities of power plant. GOLDEN SUGAR COMPANY SUNTI (A Subsidiary of Flour Mills of Nig. Plc) Jan. 2016 - Jan 2022 Steam and Power

1.Field instrument installation and maintenance 2.Plant startup and shutdown activities 3. Spare parts requisition and procurement SAP 4. Supervision of contractors jobs at site 5. Jobs reporting and documentation updating. 6. Execution of preventive and corrective maintenance . 7. Faults analysis, troubleshooting and correction. 8. System monitoring PLC, DCS, fire and gas system 9. Assisting the operators in executing tasks related to operation. 10. Training of new recruited staff on plant philosophies 11. Joint work with Mechanical and Electrical team to resolve issues on Generator 12. SOPs making and documentation 13. Controllers, Control valves, transmitters, Detectors, SOVs, analysers, regulators, positioners, PLC etc Regular checks and maintenance. 14. Electrical panel troubleshooting, contractors, relays and Electronics card replacement

A proficient Instrument Technician with mastery in roles such as: -Calibration of Pressure transmitter , Temperature transmitter Level transmitters and Flow transmitters using HART communicator, Profibus and Multimeter. -Transmitters Integration with control systems such as DCS, PLC e.t.c. -Carrying out Loop testing and troubleshooting -Carrying out measurements. -Carrying out tube measurements and bending exercises ensuring accuracy. -Carrying out hydro testing in cylinders ensuring zero leakages and accurate calibration and strict adherence with safety standard -Valves checking and maintenance ensuring efficiency of valves in flow/pressure lines. -PRV maintenance & Calibration -PSV maintenance & Calibration -Carrying out general troubleshooting - Strict adherence to industry policies and safety standard

 Performing mechanical work on rotating and static Oil and Gas equipment sub- assemblies and manufactured parts, including breakdown, overhauling, and troubleshooting using various processes, tools, and machines.  Aligning rotating equipment using laser alignment and Dial Indicator during installation and periodic maintenance.  Assembling and fitting product handling equipment, primarily new manufacture, with some repair work.  Participating in shutdowns and assisting with the removal and re-installation of equipment and other fixed plant machinery while working at heights or in confined spaces.  Conducting pre-commissioning and commissioning activities such as motor solo- run tests, checking motor vibration and bearing temperature, and performing final alignment.  Reading P&ID drawings and monitoring centrifugal pumps and compressors to ensure parameters are in accordance with the manual.  Conducting dynamic tests on centrifugal and reciprocating pumps and compressors. Page 2 of 3  Performing Major Overhaul, Top-up Overhaul, and Breakdown maintenance on rotary equipment such as Reciprocating compressor, centrifugal compressor, Air compressor, Various types of Air compressor packages, Plungers and Centrifugal pump single and multiple, Gearbox, Steam and Gas Turbine, e

Installed and maintained various detectors including Gas, Smoke, UV, and Heat rise detectors Managed installation, maintenance, and calibration of control Valves, Shutdown Valves, and Blow down valves Conducted inspections, function tests, and calibrations for critical safety equipment such as high-pressure compressors, Safety Transmitters, and flow safety transmitters Performed preventive maintenance and repairs on Crude flow systems, pressure safety Transmitters, and flow transmitters Troubleshot and rectified electrical and mechanical issues in various equipment, including Damper systems and water injection booster pumps etc. Installed and maintained various detectors including Gas, Smoke, UV, and Heat rise detectors Managed installation, maintenance, and calibration of control Valves, Shutdown Valves, and Blow down valves Conducted inspections, function tests, and calibrations for critical safety equipment such as high-pressure compressors, Safety Transmitters, and flow safety transmitters Performed preventive maintenance and repairs on Crude flow systems, pressure safety Transmitters, and flow transmitters Troubleshot and rectified electrical and mechanical issues in various equipment, including Damper systems and water injection booster pumps etc.

Instrument charge hand, calibration, pressure Transmitter, Temperature Transmitter, Level Transmitter, Flow Transmitter, Control Valve installation, loop test, commissioning, glanding, Termination, Hot Loop and Cold Loop Trouble shooting and Fault finding Loop Folder, Check list Permit, Loto, Power cable, instrument cable, Fibre Optic cable, Solonoide , Limit switch, pressure Switch, Analog Input, Digital input, Analog Output, Digital Output PLC programming, HART, MULTIMETER, TREX , PRESSURECALLIBRATOR, DECADE BOX, 24VOLTDC Piping and instrumentation drawing, Instrument Loop Drawing, Data Sheet, Hookup Drawing, Safety First :- use a over all, safety shoes, Helmet, Hand Gloves, Spectacles, Ear plug, Mask. Used A Proper Tools modification tools is not allowed Three types of Permit:- Hot work Permit, General Permit, Critical permit

Responsible for Preventive, Corrective and Breakdown maintenance of the equipment. Trouble shooting of rotating equipment. Planning and scheduling day to day work. Condition monitoring of rotating equipment’s. Contract job follow up. Modification / retrofit of the equipment. Cost control activities and reducing the Maintenance Cost. Conducting safety meeting to subordinates. Conducting tool box meeting and risk assignment for all jobs. Improving the reliability of the equipment by doing small modification. Improving the Technician / Fitter Skill. Contacting frequent Technical Sessions for co-workers. Assigning work to group of workers. Planning tools and tackles. Giving technical guidance to Technicians and fitters. Preparing daily reports and complete job reports for overhauled equipment’s shutdown reports etc. Spares Inspection at stores and other important activates for trouble free operation of the plant.

Maintenance, repairing, servicing, calibration, and trouble shooting of microprocessor, electronics based instrument such as temperature, pressure, flow, level transmitter, control valves (smart type), i/p converter, safety valve, and gas detectors. Micro motion mass flow meter ,Turbine flow meter, Vibration sensors and transmitters, proximity sensors etc.  Carry out the corrective, preventive and predictive maintenance activities for various automation systems in the plants, workshops and offsite facilities in accordance with established schedules to achieve effective functionality, reliability and efficiency in accordance with standard operating procedures.  During shutdown compressor and gas turbine overhauling Removed , Reinstalled and checked the all Vibrations probes, sensors and IGV.  Assist with vendor for EAS Anti surge system checking.  Maintain logbook on maintenance tasks carried out in order to facilitate timely information availability and ready referencing.  Check all security systems and related alarms including trouble shooting and diagnoses of routine/ emergency breakdowns.  To perform plant Turnaround and shutdown, Emergency.  Assisting with operation team for start up, troubleshooting, loop checking interlock modification of all instruments.  Checking spare parts in store and prepare spare parts list for routine & emergency activities.  Conduct observations on unsafe/safe acts and report in a timely manner.  Performs other similar duties such as observing safety rules and regulations, follow quality procedures as prescribed, maintain of good  Awareness of HSE & quality standards.  User side Knowledge in SAP and SMP(smart maintenance procedure),MERIDIUM.  Worked in YOKOGAWA CS 3000,CENTUM XL DCS & PLC, Honeywell TDC3000 and Siemens pcs7 .  Installation testing and commissioning of instrumentation items under automation system.  Calibration of Pressure, Flow, Temperature.  Calibration of displacer types level transmitter (Level Troll).  Calibration of pressure and temperature gauges.  Calibration of control valve & I/P converter.  Calibration of switches, level switches, pressure switches, flow switches, temp, switches and limit switch.  Testing of SOV and RTD and thermocouple elements, loop checking.  Piping & instrument diagram and instrument loop diagram and hook up diagram.  Complete responsibilities for bench and field calibration.  Loop checking and commissioning of all instrumentation system.  Testing of impulse line and Air line.  I had been worked as an Instrument Technician for Installation, Loop checking, glanding, Planning for field modification, Installation, calibration, loop check, glanding and commissioning, Have good experience in control valves, Smart transmitters.  Instruments Loop checking, Calibration, Maintenance and Repair.  Control valves Installation,

I have 3 years of experience in oil and gas in Mumbai offshore and I have 1 year of experience as plc Engineer in vision and I have good knowledge and experience in oil and gas offshore and automation .and I have completed diploma in electronics and instrumentation engineering in pet college in tirunelveli tamilnadu and I have various types of experience in calibration, maintenance, troubleshooting and automation and I will work with enthusiastic and team work and I will do my work sincerely and I love to work with offshore platform. Pre-commissioning & Commissioning of field Instruments and DCS system. Attending Loop checking, Simulation and Commissioning of instrument devices both HART and FF.  All kind of drawings revision checking and making a correction in P&I.  Scheduling Daily jobs and Reporting of job progress. Attends and perform duties for on call assignments and emergency jobs.  Preparing Permit to work, Material request and other documentation jobs. Attending Field jobs including Installation, Calibration of instrument devices.

Mechanical maintenance of rotating and static equipment in offshore/onshore Over 17 year of Gulf experience includes 7 year offshore experience as Senior Mechanical Technician in Pre-commissioning, Commissioning and Maintenance of Rotary and static equipment in Oil and Gas sector at ONSHORE and OFFSHORE platforms. Attend MTA 1 /2/3 AND MTA 4 As a acting supervisor ,Have good technical knowledge of Heat Exchangers, Column, Vessels, Valves, Pipelines, Pumps, Compressors, fans, blowers etc. CATIONS: Basic first aid Basic fire fighting Confined space enterend (CSE) Confined space attended (CSA) Permit holder & Permit requestor Flange technician level 1&2 Manual, Hydraulic tensioning and torqueing Rigger level 1 BA trolley attended Coxswain tranning

Handling of multiple instrument maintenance and process control as well as troubleshooting of instrument maintenance activities related to PLC ,field side ,DCS side and moreover. PM & CM activities whenever schedules of every month also assisting to operation during the shutdown Activities of any equipment. Handling the testing and Calibration of multiple instrument during PM activities. Assisting for plant start-up whenever there is requirement and stabilise the process for to make sure plant running in safe zone side. Kindly find attached updated cv for the required position. I have more than 15 years of experience in maintenance departments. 13 years working experience in oils and gas industries in gulf reqion and 2 years experience in petrochemical company in indoa.Please consider my for the required position. Thanks and regards, Zaid Ismail

Iinstallation and Commissioning Calibration and Testing Maintenance and Repair .Troubleshooting, Documentation and Reporting Safety and ComplianceTechnical Support and Collaboration System UpgradesProcess MonitoringInstrument technicians must possess a strong understanding of physics principles, electrical and electronic theory, and mechanical systems. They are vital for maintaining safe and optimal operational conditions in a wide range of industrial environ • Perform commissioning and start-up activities for all types of field instruments and control valves. • Supervise and support the installation, calibration, and maintenance of DCS systems (Honeywell TDC-3000, Experian PKS C-300). • Monitor and maintain vibration and condition monitoring systems (Bentley Nevada 3500). • Troubleshoot and calibrate process control instruments, including transmitters, control valves, and pressure sensors. • Collaborate with multi-disciplinary teams to ensure compliance with safety and quality standards. • Contribute to pre-commissioning and commissioning activities, ensuring compliance with project timelines and specifications. • Assist in the routine inspection of equipment, ensuring optimal functioning of turbines, compressors, and boilers • Working in koc oil and gas production facility gathering center (150000.BPD)plant maintenance of process instruments on various unit such as condensate recovery unit (cooper Bessemer& man-turbo) Ruston gas turbine TA1750, Desaler 3-phase crude oil separator and oil bath heaters burner control system. all

Worked in Carry out the Installation, Shutdowns activities and Corrective, Preventive Maintenance of electrical equipment’s such as MCC, LV & MV switchgear, LV & MV motors, pumps, control panels, PDP, Circuit Breakers (V, VCB, ACB, MCB & MCCB), UPS panel .Refinery power plant total 6 engines 3 engines 2.5 MW and 3 engines 6.8MW in refinery and All plants site lighting circuits checks and rectify modifying to new lights installation and troubleshooting lights and his control panels, JB’s, Cables, Cable trays and other associated plant Isom plant,HDS plant,Lummus plant, HYU,Amine Unit, HBU,HCU plant.  Performed electrical-related wiring and installation for commercial construction projects, including new construction, retrofits, remodels and plant expansions.  Experience in automation systems (DCS, PLC) of engineering, start-up&commissioning, trouble-shooting and upgrades activities.  Install and connect all types of wiring, conduit and apparatus.  Check and inspection of all electrical equipment.  Maintain and understand all plant voltage applications.  Monitor/inspection of transformers, Switchgears, MCC’s. Sub Stations, Bus Ducts, Cable Trenches and other equipment’s according to the companies SE&Q policy.  Monitoring evaluate problems Electrical tests such as ground-fault, ground resistance, insulation resistance, polarized index (PI), polarity, continuity, capacity, load and other electrical field’s tests as required.  Installation and maintenance of power and control system in water treatment, cooling towers and distillation plants.  Installation and maintenance of Distribution Transformer up to (11KV/6.6KV/ 415V).  Installation and maintenance of motor starter (Star Delta, Forward Reverse Starter, DOL & VFD Drives).  Provide Assistance in scheduling and executing the maintenance of power generation and distribution system..  Inspect electrical systems, equipment, and components to identify hazards, defects, and the need for adjustment or repair, and to ensure compliance with codes.  Identify and report, replace or repair parts, test and make adjustments.  Provide assistance to E&I engineer & other seniors in scheduling and executing the maintenance of all the electrical systems.  Perform all Electrical jobs of plant to comply with company health, Safety and Environment as well as work Permit, Lock Out/ Tag Out policies and procedures.  Installation, repairing, Testing, Joining, glanding and terminating of electrical wiring and cables.  Ensure the availability of optimized inventory of Electrical related spares, tools and equipment.  Knowledge of Maintenance and operating procedures related to equipment or facilities being worked on.  Monitor, rectify/repair electrical systems & services and maintain/update records on daily bases in CMMS (Computerized maintenance management system) & Maximo.

supports the installation, operation, maintenance, and repair of mechanical systems and equipment to ensure safe and efficient performance. Responsibilities Install, assemble, and test mechanical equipment and machinery Perform routine maintenance and inspections on mechanical systems Diagnose mechanical faults and assist in troubleshooting issues Repair or replace defective parts and components Read and interpret mechanical drawings, blueprints, and manuals Use hand tools, power tools, and measuring instruments safely Ensure equipment operates according to safety and quality standards Maintain maintenance logs, service reports, and records Assist engineers and senior technicians during projects Follow workplace safety rules and standard operating procedures Keep tools and work areas clean and organized Support preventive maintenance programs to reduce breakdowns Work Environment Examples Manufacturing plants Workshops Construction sites Power plants Automotive or industrial facilities If you want, I can: Simplify this for a school assignment

Dear sir good evening sir I'm interested in working for your organisation please help me sir you are very very thanks sir my name is Mohammed Shafiq Ur Rahman as an electrical supervisor now I'm working in sefine shipyard turkey as an electrical supervisor offshore shipyard Belding project NB 64 65 vessels repair and maintenance and construction working turkey and Saudi Aramco oil and gas petrochemical plant Marjan offshore project hyundai engineering and construction company ABB GIS 101 and 103 & 107 sub-station and switchgears installation and MV LV transformer installation and UPS battery system installation and MCC VFD and SCADA interface motor and power system installation and turbalshooting and commissioning and maintenance and construction work KSA and SEC Saudi electricity company rabigh steem power plant MHI and CC and GE unit sub-station and switchgears installation and MV LV transformer installation and UPS battery system installation and MCC VFD and SCADA interface motor and power system installation and turbalshooting and commissioning and maintenance and construction work KSA total 18 years experience please help me sir you are very very thanks sir my whatsapp and mobile number india+919036310764 and my email ID shafeequrrahman223@gmail.com attached my CV and passport copy thanks sir

I am writing to express my interest in the Instrument Technician position. I have over eight years of experience in offshore and onshore environments, and my skills align well with this role. My background includes extensive practical experience as an Instrument Technician in the Oil and Gas, Petrochemicals, and power plant industries. I have a comprehensive understanding of instrument calibration, maintenance, troubleshooting, and installation. My CV, which details my experience, qualifications, and OPITO-approved offshore certifications, is attached for your review. I am available for immediate employment and eager to contribute to your team. Thank you for your time and consideration. I look forward to discussing this opportunity further. My cell number: +918140963116 Sincerely, Milan Patel

I am a Diploma holder in Electrical Engineering with over 28 years of experience in Electrical Maintenance, Construction, Pre-Commissioning, and Commissioning activities in the Oil & Gas offshore and onshore sector. I have extensive hands-on experience in electrical installations, testing, loop checking, energization, troubleshooting, and commissioning of LV/MV systems, switchgear, MCCs, transformers, motors, UPS, generators, and hazardous area equipment. I am CompEx certified and well experienced in working in classified areas in compliance with HSE, PTW, and international electrical standards. I have worked with reputed Oil & Gas companies including SPIE Oil & Gas and NOC-A offshore projects, contributing effectively to greenfield and brownfield projects, shutdowns, and project completion activities. I am a committed team player with strong safety awareness and the ability to work under pressure in offshore environments. I would welcome the opportunity to contribute my skills and experience to your organization. I am available immediately and willing to relocate or work offshore as required.

My core responsibility is to support users by providing accurate, clear, and useful information tailored to their needs. I am designed to understand questions, interpret context, and deliver well-reasoned responses that help users solve problems, learn new concepts, make decisions, or complete tasks efficiently. This includes explaining complex ideas in simple terms, generating content, offering structured guidance, and assisting with creative or analytical work across a wide range of topics. Equally important to my role is reliability and safety. I aim to provide information that is factual, unbiased, and responsibly framed, while avoiding harmful, misleading, or inappropriate content. When uncertainty exists, I communicate limitations clearly and encourage critical thinking rather than presenting assumptions as facts. Another key responsibility is adaptability. I adjust my tone, depth, and style of communication based on the user’s intent—whether they need a brief answer, a detailed explanation, or step-by-step support. I also strive to be respectful, patient, and non-judgmental in all interactions, creating a positive and productive experience. Overall, my core responsibility is to act as a dependable digital assistant that enhances understanding, saves time, and empowers users to achieve their personal, academic, or professional goals through thoughtful and effective assistance.

Maintenance technician , preventive maintenance, Dear Sir , Good day to you, I have 13 years experience in mechanical technician in Oil and Gas onshore , hereby applied for the post mechanical technician As I came to know that you have vacancies for the post mentioned above in your esteemed organization. I assure you that I am very suitable for all your needs.Awaiting your reply at the earliest. Please let me know if you need any further information. Thanks/regards, Maria pradeep Contact No: +971565601064 India WhatsApp No : +919751180659 Mail id: pradeepmech3841@gmail.com Dear Sir , Good day to you, I have 13 years experience in mechanical technician in Oil and Gas onshore , hereby applied for the post mechanical technician As I came to know that you have vacancies for the post mentioned above in your esteemed organization. I assure you that I am very suitable for all your needs.Awaiting your reply at the earliest. Please let me know if you need any further information. Thanks/regards, Maria pradeep Contact No: +971565601064 India WhatsApp No : +919751180659 Mail id: pradeepmech3841@gmail.com