Under direct supervision, performs Job Safety Analysis (JSA) and safety meetings, and the rigging up and down of Coil Tubing service line equipment. Assembles and prepares equipment for installation and service.  Maintains general housekeeping, clean up, repair, and preparation of equipment for the next job. Performs pre/post job Coiled Tubing equipment inspections. Responsible for safe crane and rigging operations during the delivery of services in accordance with Customer's design and KPI's. Operates High Pressure fluid pump and coil tubing support equipment (flow back package). Performs hydrostatic testing on Blow Out Prevention (BOP) and reels during pre/post job procedures including Preventative Maintenance (PM's). Mentors peers and trains Operator Assistants. Monitors well control parameters and calculations before and during job applications. Performs and complete preventative maintenance on all Coil Tubing associated equipment. Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations. Consequences of error are easily measured

1. Operating coiled tubing unit, nitrogen unit, auxiliary equipment like centrifugal pump, widen pump. 2. Operating Ht-400 Pumps, Batch Mixer (Vertical Blender). 3. Servicing Of Bop, 2” X 2” Plug Valves, Side Door Stripper Assembly, Conversion Of Injection Head, Stripper, BOP and Geese-neck to different sizes ranging from 1.25” to 2.3/8”. 4. Rig Up And Rig Down Of Coiled Tubing Spread. 5. General Maintenance and Servicing of Coiled Tubing Equipment. 6. Prepare equipment for job as per. 1. On arrival to the location, raise your PTW 2. Spot Equipment according to the zones 3. Rig-up high/low pressure lines, connect all hydraulic hoses and function test all equipment 4. Rig-up Well head crossover, 1st BOP(Combi), Flow Tee, 2nd BOP(Quad) and pressure test. 5. Stab CT pipe into IJH, Make up connector and Pull test, fill up coil and pressure test connector, Make up complete BHA as required for the job.

Im a high Pressure fluid pump operator , I have the responsibility for maintenance the pumps , checking the triplex or centrefiguel pump ( booster pump ) spare parts and repair or changing if required , check the all fluids level like gear oil , engine oil , transmission oil and coolant water, knowledge miduem experience on the mechanics , cleaning after done any job , my task also tracking the engin hour's running for upcoming service, tracking the gages calibration , and sertafication , Responsibility on the rigup and rigdown at the well site or on the base as per the job program, responsibility about all pumping jobs packaging including wilden pumps, high pressure hoses, low pressure hoses and the crew also , knowledge of chemicals and acid mixing with a safty rules, Knowledge with high responsibility of the safty procedure on the operation , fully helping as a team work , a responsibility to find solutions to problems that occur at work sites , Responsibility for work reports , Responsibility for night shift work

Profile 28+ years in Coiled Tubing & Nitrogen Services, including 13 years with Schlumberger and 15 years consulting for leaders like Schlumberger and Baker Hughes. Extensive Onshore/Offshore experience across the Middle East, South East Asia & India, including Deepwater operations, Rig-less fleets, and complex well interventions. Known for technical excellence, operational leadership, and delivering safe, high-quality CT solutions. ________________________________________Core Strengths • Regional & Operational Expertise: Drill Ships, Jack-ups, MPSVs, Barges, Onshore Rigs, Rig-less fleets. • Leadership & Management: CT Technical Consultant, General Field Specialist, Lead Supervisor; managing crew, equipment, logistics, service quality, and client relations. • Technical Mastery: Fluid pumping & Nitrogen operations, Stimulation, Cleanouts (post-frac foam), CT logging, Fishing, Milling, ESP Completions, Deepwater Operations, CT Catenary operations. • Job Experience: Category 1-3 jobs, highly deviated & horizontal wells, full CT rig-less packages offshore/onshore. • Equipment Range: 1¼” – 2⅞” CT, applicable to swamps, deepwater, jack-ups, and varied terrains. ________________________________________Key Achievements • Led multiple Deepwater CT projects with flawless execution and safety record. • Successfully planned and supervised complex CT interventions across multiple regions. • Delivered operational excellence in both onshore and offshore CT fleets, improving efficiency and client satisfaction. ________________________________________Roles of Interest • Project Coordinator / Project Lead • Well Services Supervisor / CT Supervisor • Cell Leader / Base Manager • Service Quality / HSE Lead • Technical Training Instructor • Special Projects on Well Intervention ________________________________________Professional Summary Combining technical expertise with leadership acumen, I excel at planning, executing, and supervising complex CT operations. My regional experience, operational knowledge, and hands-on leadership enable me to consistently deliver safe, efficient, and high-quality well interventions.

I am a Well Intervention Specialist with over 12 years’ experience in Well Intervention services (Coiled Tubing, Stimulation, Cementing, Nitrogen Pumping and High Pressure pumping) and a Mechanical Engineering post graduate. I have held Field Engineer, Specialist, Supervisory and Field operator roles while carrying out various Well intervention services that span over Saudi Arabia, Kuwait and Nigeria, leading to improved productions for Saudi Aramco, Kuwait Oil Company (KOC) and various International producing companies within Nigeria. Successful services rendered onshore and offshore, on rigs and rigless operations (inclusive of their various Coiled tubing related applications) have included: Stimulation jobs (Matrix acidizing, acid washes), Cementing jobs, (zonal switches, zonal isolations), Well bore cleanouts, Milling Operations, Nitrogen operations for Well lifts and tubing purges, Well kills (gas wells inclusive), ESP flushes, Flow line flushes, injectivity tests, sand washes, support services for critical E- line/wireline operations, and miscellaneous high pressure pumping, all towards well control, restoring and improving production. I am a dedicated professional, hardworking, a quick learner, ever eager to develop further on my knowledge, skillset and values, helping subordinates develop themselves, while working with a team and other professionals to achieve a common goal.

Coil tubing Supervisor and can operate all auxiliary equipment like HP pumps, BATCH MIXER, Nitrogen pumps and also have coil tubing Engineering experience ,thats job program design . Handle safety meetings,rig up unit's and coordinate the entire operation during well intervention operations.Presently now am working with Baker Hughes KSA . I can handled all equipment maintenance prior to mobilisation and demolished. Handle ticket preparation and job logs during operation. Also can prepare End of job report. I make sure all the team members work as a team and open to hear from the least personnel. Make sure we hold TBT( Tool box talk) and review the job procedures. Handle circa job simulation software STEM( Acid simulation software). i have handled jobs like Sand cleanout, Fishing operations, Cement plug, Water shut off , cement packer ,SCON

 Lead and manage the coil tubing crew to ensure safe and efficient operations.  Provide training and guidance to junior staff.  Plan and coordinate coil tubing operations, including preparation and job execution.  Ensure that all operations comply with industry standards, client requirements and safety regulations.  Troubleshoot and solve operational problems.  Enforce safety protocols and conduct safety meetings.  Ensure all safety equipment is used properly and all personnel are trained in emergency response procedures.  Oversee the maintenance, repair, and inspection of coil tubing equipment.  Ensure that all equipment is in good working condition and ready for deployment.  Maintained detailed records of all operations, including job reports, equipments usage, and maintenance logs.  Prepare and submit daily, weekly and end-of-job reports  Serve as the primary point of contact with clients during operations.  Provides regular updates to client on job progress and address ant concerns or issues.  Ensure all operations comply with environmental regulations and company policies.  Stay updated with industry standards and best practices.  Coordinate logistics for equipment and personnel to and from the job site.  Manage inventory of necessary supplies and equipment.  Ensure the quality of services provided meets or exceeds client expectations.  Implement quality control measures to improve operational efficiency.  Lead the response to any emergencies or incidents on the job site.  Ensure all personnel are aware of and follow emergency procedures.

A highly competent and experienced upstream professional with international oilfield experience covering Well Interventions, P&A and Well Services for both Onshore & Offshore Operations. I am an analytical and meticulous professional holding experience in fast paced environments within high profile oil & gas companies. Involved in various daily and routine operations for Coil Tubing Services Offshore Operations for client. Task were given included but not limited to; - Job planning and preparations and well site executions - Constantly communicate with engineers/managers in town for changes throughout the job executions processes - Ensure all jobs were executed as per company standards and government’s regulations - Ensure all equipment comply with client’s requirements and expectations - Ensure all jobs execute as per safety requirements - Spare parts preparations/planning and

Operates programmable optimum density (POD) blender, Liquid additive system (LAS) pumping skid, Vertical blender, Centrifugal pumping skid, Simulation pumping skid and Cementing pumping skid. • HSE, Quality, Risk and incidents reports, observation and intervention reporting. • Prepare the equipment on the well site prior to the operation. Rigging up of the equipment with treating irons, low pressure and high-pressure hoses, mixing and pumping the necessary chemicals, proppant(slurry) and fluids during the gravel pack jobs. • Pump specially engineered fluids at a high pressure and rate into the reservoir perforated pay zone to be treated and friction reducer causing a fracture to open. • Standard equipment maintenance (STEM) on equipment before and after any job and reporting on STEM data sheet. • Treating irons inspection and maintenance. Rebuilding of swivels, loops and frac manifold. • Inspection, rebuilding and repacking of plug valves, check valves, butterfly valves, centrifugal pump, choke valves and high-pressure fluid ends. • Doghouse and spares inventory. Inspection of low- and high-pressure hoses. • Long shift operations for delivering safe, efficient and reliable PSD to customers. • Completion of web training modules and web-based test certifications

Coiled tubing, senior, supervisor supervising Coiled tubing, nitrogen stimulation, onshore offshore jobs In this role I handled a wide span of operational and supervisory duties across land rigs, rigless sites and offshore units. I carried out coiled tubing work such as cleanouts, well activation, acid stimulation, nitrogen lifting, milling, fishing and cementing tasks, including assignments in high-pressure and high-H2S conditions. I prepared equipment for each job, confirmed readiness through inspections and checklists, and supported commissioning when new units arrived at the base. I kept a steady focus on planning, reporting, and record keeping, completing pre-job and post-job documentation and submitting job tickets on time. I supervised crews during rig up, rig down and live operations, offering guidance, evaluating performance and helping new staff develop their skills. I worked closely with coordinators, clients and management to plan daily activities, allocate resources and maintain schedules. I ensured compliance with company standards, local regulations and HSE requirements, promoting safe habits and resolving issues as they appeared in the field. I also performed engineering calculations, reviewed well schematics and monitored the technical progress of complex jobs. Troubleshooting of equipment and processes formed a routine part of my duties, especially during demanding operations in remote desert environments. I kept inventory updated, organized demobilization for each site, and prepared units for the next assignment. Through consistent communication and steady operational oversight, I helped maintain service quality and client satisfaction across all locations.

: Operate and monitor high-pressure pumps, fluid systems, and mixing units during CT and HWU operations. : Assist in rig-up and rig-down of Coil Tubing units, HPU, BOP stack, accumulator units, and surface equipment. : Perform pressure tests on lines, BOPs, lubricators, and pumping systems to ensure integrity. : Control fluid rates, pressures, and volumes according to job program and supervisor instructions. : Assist in CT interventions such as cleanouts, acidizing, milling, nitrogen lifting, logging support, tool deployment, etc. : Support HWU operations such as tubing pulling/running, fishing, P&A, workover, and snubbing operations. : Ensure job execution follows the well program, procedures, and safety standards. : Coordinate closely with CT Supervisor / HWU Supervisor / Wellsite Leader during operations.

Have experience working as Work Over and Well Service Site Representative for Pertamina Hulu Rokan. Experienced with subsea operation in Transocean Deepwater Nautilus Rig. Experienced work as Well Site Coordinator for Schlumberger Unconventional Project in Aramco. Join Halliburton Energy Service in Basra, Iraq. Incharge as Coil Tubing Pumping Service Supervisor to deliver Intervention job, Bullheading matrix stimulation for ENI oilfield area, Shell Majnoon area and Petronas Gharaf area. Field Specialist in Schlumberger, Spent 4 years as Fracturing and Stimulation Supervisor to deliver service in Chevron oilfield area in Duri, Pertamina oilfield area in Zamrud, Medco Energy in South Sumatera, British Petroleum in Oman, PDO in Oman. Responsible and passionate about delivering outstanding quality and service. Adaptable supervisor with extensive experience providing first-class results. Meets job demands and deadlines through diligent workethic and dedication to quality. Dedicated Supervisor with experience in achieving tangible results and cross-team collaboration. Proactive and excited to partner with like-minded individuals to achieve goals.

I have 10+years experience in coiled tubing. Currently working with Saudi Halliburton offshore project as a CT supervisor. I have worked in various CT units hydrarig, jereh, S&S, Halliburton. I have 10+years experience in coiled tubing. Currently working with Saudi Halliburton offshore project as a CT supervisor. I have 10+years experience in coiled tubing. Currently working with Saudi Halliburton offshore project as a CT supervisor. I have 10+years experience in coiled tubing. Currently working with Saudi Halliburton offshore project as a CT supervisor. I have 10+years experience in coiled tubing. Currently working with Saudi Halliburton offshore project as a CT supervisor. I have 10+years experience in coiled tubing. Currently working with Saudi Halliburton offshore project as a CT supervisor.

Coil tubing Operation and Wellhead Production maintenance jobs with calibrated tanks of oil well and gas well with various onshore and offshore rigs.  Conducting Pre Job Safety Meeting before all jobs.  Following Job safety analysis, Risk assessment and simultaneous operation.  Spotting of equipment as per standards and space available in site.  Co-coordinating team members in the absence of supervisor.  Ensure safety and PPE (Personal Protective Equipment) of team members.  Running of boiler for steam generation.  Taking readings and note down the parameters of flowing well.  Reporting supervisor for any problem and acting safely in emergency situation..  Experience in surface well testing of exploratory wells, production wells and injection wells.  Experience in Hydro fracturing flow back, well activation (nitrogen lifting, diesel pumping), and Production testing, early production facility.  Rig up of equipment and piping as per procedure and as per standard.  Pressure test of lines and equipment as per required pressure and program.  Doing functional test of ESD, Auto ignition, Hi-Lo pilot  Calibrating sensors, Pressure gauges DP recorder, Static pressure reorder with Dead Weight tester for cross checking any errors.  Lighting the flare before opening the well using pilot gas.  Pressure equalizing upstream before opening the well.  Checking and recording field data in time intervals and note down the sequence of events.  Using sacrificial choke for initial clean up till the required fluid quality is achieved.  Using SMS Determining the quantity of sand and quality of flow before diverting to separator.

• Coiled tubing operation expert : Successfully operated a lot of coiled tubing operations including acidizing, fishing, milling, sand cleanouts, kick off using various sizes. • Health. Safety and environment (HSE) : Extensive knowledge of HSE regulations, ensuring operation are conducted safety and efficiently • Team collaboration : excellent team player with a strong commitement to collaboration and achieving collective goals. • Leadership and communication : proven team leader with exceptional communication skills, the ability to remain composed under pressure. • Equipment Maintenance & problem-solving : skilled in routine maintenance of engines and other coiled tubing equipment components Dailly coiled tubing operation in Hassi Messaoud fields : • Assisted Rig up & Rig down both Rig and Rigless • Performed RIH & POOH and PULL TEST many time in various jobs • Involved in job planning, preparation, execution from job procedure to well site execution. • Well cleanout, kick off, stimulatoin (reformat, xylen, naphta, matrix acidazing and milling & fishing operation). • Collaborate with engineering teams for job planning and technical support • Performe dailly equipements checks and troubleshooting mechanical issues. • Supervised high pressure pumping and nitrogen lifting bull heading operations. • Managed safety aspects of operations, including PPE use, H2S guidelines,

I am writing to express my keen interest in the Coiled Tubing Supervisor position at your esteemed organization. With over 11 years of experience in coiled tubing operations, well stimulation, pressure control, and downhole interventions, I am confident in my ability to contribute significantly to your team. Throughout my career at Halliburton – Egypt, I have successfully supervised and executed high-pressure, high-temperature (HPHT) well interventions in both onshore and offshore environments. My expertise spans: Managing coiled tubing units, fluid pumps, nitrogen systems, and well control equipment. Ensuring strict adherence to HSE and pressure control standards. Providing technical support and training to field crews, enhancing operational efficiency. Conducting risk assessments and job safety analysis (JSA) to uphold high safety standards. Leading critical projects, such as APACHE Plug & Perf Campaign, Thru-Tubing Gravel Pack (Abu-Qir Offshore), and Ultra Deepwater HPHT Wells (ENI ZOHR Gas Field - Saipem 10000). I hold a Bachelor of Law from Cairo University (2009) and certifications in IWCF Level 4, BOSIET, and H2S Breathing Apparatus, along with advanced Coiled Tubing Supervisor Training (Tier 3) from Halliburton. Additionally, my ability to analyze job performance, data acquisition, and well stimulation effectiveness has enabled me to optimize service quality and well integrity. My combination of technical expertise, leadership, and problem-solving skills makes me an ideal candidate for this role. I am eager to bring my dedication and expertise to your team and would welcome the opportunity to discuss how my skills align with your needs. Thank you for considering my application. I look forward to the possibility of contributing to your organizations success.

responsible for preparing, operating, and monitoring the nitrogen pumping unit to ensure safe and efficient job execution. This includes performing pre-job inspections on the N2 pump, confirming fluid and nitrogen levels, verifying calibration of gauges, and ensuring all safety systems are functional. During operations, the operator controls pumping rates, pressures, and temperatures, communicating continuously with the CT supervisor and other crew members to maintain stable and accurate nitrogen delivery, plus, supports the CT operator by helping with equipment rig-up and rig-down, connecting hoses, checking valves, and ensuring all lines are properly secured and leak-free. performs routine inspections, assists with monitoring parameters, and relays information between the operator and field crew.

Operating nitrogen unit and fluid pump. Base and field maintenance of equipment like coiled tubing units, N2 pump/converter, batch mixer, Preventers (Bop) choke manifold, flow back tanks, and fluid pump. Pressure-testing and charting. Equipment mobilization, rig-up and rig-down vacuuming of nitrogen tanks. Report and Log book up date. Servicing of plug valves and other valves servicing of swivel and treating irons. Flush coiled tubing reel with water and nitrogen. Job execution, clean out, Kick off Operation pumping equipment, such as operator triplex pump. Starts, operates, and stops the water injection pumps as required. These pumps pressurize and inject water into the well. Monitor and adjust the flow rates and pressure to ensure optimal water injection levels that maintain reservoir pressure without damaging the reservoir. Use control panels and monitoring systems to observe flow meters, pressure gauges, and control valves to ensure proper functioning. Routine Maintenance: Perform regular inspections and maintenance on pumps, pipes, valves, filters, and injection equipment to ensure smooth operation and prevent downtime. Identify and resolve operational problems, such as pump malfunctions, leaks, or blockages in pipes, to avoid interruptions in water injection. Water Filtration: Ensure that the water being injected is properly filtered and treated to avoid introducing contaminants, which could damage the reservoir or cause equipment issues. Chemical Injection Management: Some water injection systems require chemicals (e.g., scale inhibitors, corrosion inhibitors).

Professional Summary Experienced oilfield equipment operator with over 3 years of hands-on expertise and maintenance in coiled tubing operations, nitrogen units (EO), and fluid pumps (EO). Additionally, over 10 years of experience maintenance and operating cranes and heavy equipment. Skilled in performing field operations safely and efficiently, with a strong commitment to operational excellence and HSE standards. Coiled tubing operator performing various operations including well interventions, cleanouts, and maintenance, with consistent 100% CSAT scores, and achieving a 60% risk reduction in some jobs. Onshore experience in R/M, R/U, R/D, N/U... conversion, preparation and spooling operation... Conducted multiple CTU jobs: Ref/Mud Acid cleanouts, IGLS, VSI, Matrix, Kick-off, fishing, post Frac... Experienced in driving articulated truck, light vehicle, and heavy NA truck, covering over 90 km per day. Operated CTU (Mast unit, trailer mounted, truck mounted), N2 units (NPF, NPS), fluid pumps (MPF, CPF). Person in charge, onshore mobile crane Sub L2, mechanical lifting, Banksman and slinger.

Mechanical power engineer graduated 2017 from Mansura university finished military service working as frac Pumping stimulation acidizing senior operator with coil tubing and frac departments at SLB Saudi Arabia for one year and halliburton Egypt currently looking for a new chance as coiled tubing operator or assistant coiled tubing operator have 6 experience in oil field can also mix all kind of fluids liner gel acid or slick water can operate SLB pod and halliburton blender NB4K blender work with team and under work pressure with concentration and good physical strength have courses from NEFT energies in Saudi Arabia and in halliburton Egypt , can deal with high and low pressure testing and pumping and maintenance , work in conventional and unconventional wells , and high thermaway, acid jobs , post frac cleaning jobs .