•The Assistant Mechanic supports the lead mechanic in maintaining and repairing all mechanical equipment to ensure safe, uninterrupted drilling operations. Key Responsibilities: Perform preventive and corrective •maintenance on diesel engines, mud pumps, compressors, draw works, and centrifugal pumps. •Inspect and replace worn components such as bearings, seals, belts, and gaskets Monitor mechanical systems during operations and report any abnormalities. •Follow permit-to-work (PTW) and lock-out/tag-out (LOTO) safety procedures Participate in safety meetings, toolbox talks, and job safety analyses (JSA). •Maintain workshop cleanliness, manage spare parts inventory, and document maintenance logs. •Assist with equipment shutdowns, startups, and rigging during rig moves Report deficiencies and completed work to the lead mechanic or OIM during shift handovers.

🔧 Electrical Maintenance & Repair • Maintain, troubleshoot, and repair all electrical systems on the rig • Work on generators, motors, switchboards, transformers, and control systems • Ensure uninterrupted power supply for drilling operations • Diagnose faults using testing equipment (multimeters, insulation testers, etc.) ⸻ ⚙️ Equipment Installation & Commissioning • Install electrical wiring, panels, and equipment as per technical drawings • Assist in commissioning of new electrical systems and upgrades • Ensure all installations meet offshore and hazardous area standards (ATEX/IECEx) ⸻ 🛢️ Power Generation & Distribution • Operate and maintain diesel generators and power distribution systems • Monitor electrical load balance and system performance • Respond quickly to power failures or blackouts ⸻ 🔍 Inspection & Preventive Maintenance • Conduct routine inspections and preventive maintenance schedules • Identify potential faults before failure occurs • Maintain records of maintenance and repairs ⸻ 🚨 Safety & Compliance • Follow strict offshore safety procedures and permit-to-work systems • Ensure compliance with electrical safety standards and company policies • Work in hazardous areas safely (explosion-proof equipment handling) • Participate in emergency drills (fire, evacuation, shutdown) ⸻ 📊 Troubleshooting & Fault Finding • Quickly diagnose electrical issues under pressure • Minimize downtime of drilling operations • Work closely with mechanical and drilling teams ⸻ 📋 Documentation & Reporting • Maintain logs of electrical work, faults, and maintenance • Update technical drawings and system documentation • Report issues to senior engineers or supervisors ⸻ 🤝 Team Coordination • Coordinate with: • Drilling crew • Mechanical technicians • Instrumentation technicians • Support overall rig operations

Over than 7 years in Mudlogging. - Interpret lithology and descriptions, Control sensor and data ascii in the well.- Assistant geologist Monitoring (ANAX 500 server, Xview hybrid) recording/ providingdrilling data/monitor formation gases.- Collecting/ examining drilled cutting samples.- Prepare and Maintain surface logging units for Logging Jobs.- Maintain all components of the Logging system (Sensors, Server, workstations, Gassystem, network peripherals,..etc).- Notification when trends change (abnormal conditions)- Reporting Requireme Monitors tasks in a safe, timely and accurate manner in order to assist in theefficient completion ofexploration and development wells for oil and gas.Troubleshoots repairs and configures all SLS’s computer systems to clientspecifications. Maintain effective communication with the client, mud logging crew anddrilling and other service personnel.Worked as Mud Logger/Data Engineer in Algeria/Kuwait, Development &Exploration wells with different clients: FCP/ENI,Sonatrach, AGIP, Anadarko & KOC.

In-Charge of all rig equipments maintenance, repair and modification. ➢ Organizing and ordering of spare parts of various machineries, and ensure correct type and quantities of spare parts are requisitioned for new equipment ➢ Responsible documentations of maintenance done, Work Instructions. ➢ Perform the PM for all rig equipment and CM for unscheduled maintenance. ➢ Responsible for keeping the Senior Tool pusher updated on the condition of the machinery and equipment. ➢ Implementing the safety STOP program according to Premium Drilling’s& Client’s Standards. ➢ Maintaining All Drilling Equipments. - responsible of performing the maintenance tasks with the suitable safety regulations required . -do the daily, weekly check lists. - cooperation with owner's maintenance Supervisor to follow up the maintenance plan.

Monitored and analyzed real-time drilling parameters (ROP, WOB, torque) to identify anomalies, ensuring operational safety and data integrity. • Performed advanced QA/QC of gas data and interpreted gas ratios to determine reservoir charac- teristics and identify hydrocarbon zones. • Collaborated with drilling teams to identify and validate optimal casing points and correlations based on formation data. • Managed and validated real-time hydraulic calculations; assisted in troubleshooting complex hy- draulic issues in HPHT environments (MW up to 19ppg). Supervised and trained junior mud loggers, maintaining high standards for data accuracy, consistency, and completeness. Provided comprehensive geological records and interpretations to clients, including detailed anal- ysis of oil and gas shows. • Collected, analyzed, and described geological samples and cuttings according to AAPG standards. • Prepared and delivered daily Mud Logs, Time Logs, and final Composite Master Logs, ensuring timely and accurate reporting to wellsite geologists. Maintained and calibrated all mudlogging sensors and equipment, including TGD and High-Speed Chromatographs, to ensure 100% uptime. • Managed rig-up/rig-down operations, inventory, and all unit housekeeping and maintenance duties.

DRILLING & WORKOVER SUPERVISOR Senior Drilling & Workover Supervisor with 17+ years of international experience leading land and offshore rig drilling, workover, well intervention, and well integrity operations across LATAM, North America, the Middle East, and Africa. Strong track record in HPHT, H2S, MPD, ERD, well control, artificial lift, and operational leadership in challenging environments. Proven ability to manage contractors, enforce HSE compliance, reduce NPT, and deliver safe and efficient field operations. Bilingual: English/Spanish. CORE COMPETENCIES • Drilling Operations (Land and Offshore Rigs) • HSE Leadership (PWT, TBT, JSA, Stop Work Authority) • Workover & Well Intervention • Contractor & Service Provider Management • Well Control Wellsharp (IADC Level 4) • Daily Reporting & KPI Tracking (NPT, Cost, Efficiency) • Tubing Replacement / Recompletion • Operational Planning & Risk Mitigation • Artificial Lift (ESP, PCP, Gas Lift) • Multicultural Crew Supervision • HPHT, H2S, MPD, ERD • Unconventional Drilling Operations

Highly skilled and results-driven Directional Drilling Engineer (DDX) with extensive experience in planning, executing, and optimizing complex directional drilling operations. Proficient in designing precise well trajectories and employing advanced Measurement While Drilling (MWD) technologies to ensure accurate wellbore placement and maximize operational efficiency. Adept at real-time monitoring and data analysis to make informed adjustments that minimize non-productive time (NPT) and enhance drilling performance. Demonstrates strong collaboration with cross-functional teams to meet client objectives while ensuring adherence to safety and environmental standards. Core Competencies: • Advanced well trajectory design and directional drilling techniques • Expertise in MWD tools for real-time data acquisition and analysis • Proficient in optimizing drilling performance and troubleshooting downhole issues • Real-time operational decision-making to improve well placement accuracy • Strong focus on safety, compliance, and risk mitigation in challenging environments • Competent in utilizing industry-leading drilling software and reporting systems

To whom it may concern, With over 18 years of hands-on offshore drilling rig experience including the last 8 as Senior Maintenance Engineer on the Moliqpak platform refurbishment project in Russia. I am applying for any suitable position at GPES. I have successfully led the complete electrical and mechanical upgrade of a jack-up rig, managing DC-to-AC conversion (ABB VFD) conversion, replacement of Top Drive, Draw Works, Iron Roughneck, Pipe Handling, Mud Pumps, CRI, and Waste Heat Recovery systems, along with all associated high- and low-pressure pipework. These projects were delivered safely, on schedule, and within budget while maintaining full operational capability. Previously, as Maintenance Supervisor and Senior Systems Engineer on the Lun-A and PAB platforms, I maintained zero lost-time incidents while supervising multidisciplinary crews, managing critical spares, and executing complex shutdowns using SAP and ISSOW systems. My career began with NOV and Schlumberger in Canada and Qatar, giving me factory-level expertise on Top Drives, VFDs (ABB/Siemens/Toshiba), Amphion control systems, and automated pipe-handling equipment. The same systems I have supported and upgraded offshore for the past 17 years. I hold a Mechanical Engineering Technology diploma, ASET CET certification, CompEx, BOSET, ABB ACS800 Startup & Service certification, and a full suite of offshore survival and safety tickets. I am eager to bring my proven track record in major rig upgrades, safety leadership, and technical excellence to GPES. I am available at your earliest convenience for an interview and can be reached directly at +7-962-119-9585 or G37humby@gmail.com. Thank you for your consideration. Sincerely, Stephen Humby

Operational Leadership: oversee the day-to-day drilling operations, coordinating with the Company Man and the Driller. - responsible for planning upcoming phases, ensuring all necessary equipment (bits, casings, BHA components) is on-site and ready for deployment. Safety & Compliance: As a leader, i enforce strict QHSE standards. lead safety meetings, oversee Permit to Work (PTW) systems, and ensure the crew adheres to "Stop Work Authority." am the primary responder during well control incidents or rig emergencies. Technical Supervision:monitor complex parameters including torque, drag, and hydraulics. supervise critical activities like running casing, cementing, and nipple-up/down of BOP stacks. Personnel Management: manage crew rotations, performance evaluations, and training.i bridge the gap between the drilling floor and senior management, fostering a culture of technical competence and safety. Maintenance & Inventory: i ensure the rig’s mechanical and electrical systems—from the drawworks to the mud pumps—are maintained under a Rig Management System (RMS) to minimize non-productive time (NPT).

Sampling: Collection of drilled samples at specified lagged intervals. Washing, sieving and drying followed by packing and labelling. Microscopic examination of samples and their interpretation. Gas Detection: Continuous separation of Hydrocarbon gases C1, C2, C3, iC4, nC4 and C5. Prepare Gas Ratio Plot to obtain formation producibility. Monitoring: (Mud vol, Mud Weight, Mud Temp, Gas and drilling parameters (ROP, WOB, RPM, SPM, SPP, Hook load and torque etc.) for signs of imbalance of down hole. Monitoring of hole filling parameters during all tripping. Monitoring Pumping Data: (SPM, SPP, Lag time, Lag strokes) Kick Control: Maintaining the pre – kick control data when mud or drilling parameters change. Pressure evaluations and analysis of control indicators (D’ Exp. Sigma, Shale factor, Shale Density), monitor the shutting & circulation pressure and report to well control personals as needed. Formation Evaluation: Interpretation of well logs (Gamma, Resistivity and Density logs). Other: Preparing well logs and final well reports, which include Master log, D' Exp. plot, Composite Logs, Shale Density & Shale Factor Plots, Depth vs FLT, Dep Vs ROP Plots. Rig up and Rig down all mudlogging sensors, operation, maintenance, calibration and troubleshooting of different equipment of mud logging unit.

• Monitored real-time drilling, mud, and gas data across multiple wells to ensure data accuracy and operational efficiency. • Analyzed rock cuttings and mud samples to determine lithology and hydrocarbon indicators. • Performed mineralogical and chemical analysis of rock samples using XRD and XRF techniques. • Identified and troubleshot data issues from Hawk and other data acquisition systems. • Managed and monitored drilling fluid levels, reporting anomalies in drilling parameters to relevant stakeholders. • Prepared daily, weekly, and monthly drilling performance reports with quality control checks. • Tracked and reported key drilling parameters including ROP, SPP, SPM, RPM, WOH, WOB, and H₂S levels. • Compiled detailed well reports, including mud and gas logs, bit records, casing tally, and test data. • Conducted rig-up and rig-down operations for mud logging units, including tool diagnostics, equipment preparation, testing, calibration, and troubleshooting. • Continuously monitored wellbore gases and lithology; prepared geological reports including shale factor, shale density, and limestone calcimetry for wellsite geologists.

My role is senior mud logger act as Data engineer at petroservices GMPH company in Egypt My job responsibilities is Monitoring real-time drilling parameters and alerted team to anomalies. Ensuring safety and efficiency during well site operations. Geological interpretation and formation evaluation. Recording and interpretation for gases concentrations and gas evaluation. Full description of the geological samples and the hydrocarbons shows. Calibration of the drilling sensors and the gas chromatograph. Good knowledge about drilling fluids, MWD, LWD and wireline logging. Make all reports Daily Geological reports, Daily drilling reports,midday Update report midnight reports. Creat all mud logging logs Maintenance and repair of all seniors in mud logging unit • Monitoring real-time drilling parameters and alerted team to anomalies. • Ensuring safety and efficiency during well site operations. • Geological interpretation and formation evaluation. • Recording and interpretation for gases concentrations and gas evaluation. • Full description of the geological samples and the hydrocarbons shows. • Calibration of the drilling sensors and the gas chromatograph. • Good knowledge about drilling fluids, MWD, LWD and wireline logging.

As a Field Service Manager, I am responsible for SWT & DST job design, planning, managing the crew and equipment. Base coordination, reporting with line manager and client. Field visits and planning ongoing & upcoming operations, mobilizing the equipment and personal. Responsible for the maintenance & trouble shooting as per required at field or base. Meetings with the client for ongoing and upcoming operation and Supervising job for HPHT & HFR wells (12000bbl/day) Responsible for the training and evaluation of the well testing personal. Well design, planning, including preparation of activity programs. Identify solution and mitigating actions to risk and challenges. Mitigate risk in any technically challenging well testing environment with an advanced range of surface well control options. Managed 40 people working under my supervision. Rock solid experience of trouble shouting of the software & hardware at well site under extreme pressure of client.

Accomplished Lead Drilling Engineer with 14 years of diverse experience spanning drilling, completion, intervention, and well integrity engineering. Renowned for successfully managing complex projects, consistently meeting tight deadlines, and delivering outstanding results in the oil and gas industry. Combines hands-on technical expertise with strong planning and analytical skills to drive operational excellence and achieve project objectives. Led and inspired a team of Drilling Engineers, strategically allocating workloads, setting priorities, and championing professionalgrowth through targeted training and performance reviews. • Designed and executed well programs that consistently met or exceeded drilling and completion standards, integrating advanced technologies and optimized construction methods for offshore exploration and development. • Provided expert technical support across drilling exploration, slot recovery, and workover operations, ensuring alignment withproject objectives and industry best practices. • Led the development and implementation of well delivery processes, guidelines, and standards as part of the well engineeringexcellence team. • Drove innovation in well design and drilling practices, achieving a 25% improvement in efficiency and a 15% reduction in non-productive time through strategic planning and adoption of new technologies

In my current role as a Graduate Integrity Engineer, I am responsible for supporting engineering activities that ensure the safe and reliable operation of assets through data analysis, risk assessment, and technical evaluations in accordance with industry standards. I regularly work under tight deadlines and operational pressure, prioritizing tasks effectively while maintaining a strong focus on safety and technical accuracy. My role requires close collaboration with operations and field teams, and I am comfortable working in site‑based and field environments, including exposure to live operations and safety‑critical activities. This experience has strengthened my ability to work effectively in high‑pressure conditions, adapt quickly to changing operational demands, and follow strict HSE procedures. Through my work, I have developed a strong foundation in engineering judgment, operational awareness, and multidisciplinary teamwork, which are highly transferable to drilling engineering. I am particularly motivated to pursue a drilling engineer role because it offers greater field exposure, direct involvement in operations, and the opportunity to contribute hands‑on to well delivery while applying engineering principles in dynamic, fast‑paced environments.

A mud logger is a specialized oilfield technician who monitors drilling operations in real-time, functioning as the "eyes and ears" of the rig by analyzing rock cuttings and drilling fluids. Their key responsibilities include collecting and analyzing geological samples, monitoring gas levels (via gas chromatography), tracking drilling parameters (like torque, pressure, and speed), maintaining logging sensors, and generating daily mud logs, which are vital for identifying potential reservoirs, ensuring safety, and optimizing drilling efficiency. Key Roles and Responsibilities: Sample Collection and Analysis: Regularly collect rock cuttings from the shale shaker, clean them, and analyze their lithology (rock type, mineralogy, hydrocarbon fluorescence) under a microscope to determine the formation being drilled. Real-Time Data Monitoring: Monitor drilling parameters such as rate of penetration (ROP), pump pressure, mud flow rates, and torque, often using automated logging systems to detect anomalies. Gas Detection and Evaluation: Utilize gas chromatography equipment to detect total hydrocarbons and analyze gas ratios (methane through pentane) to identify potential hydrocarbon reservoirs and assess hydrocarbon-bearing potential. Safety Monitoring (Gas Kicks/H2S): Detect and alert the drilling team to early warning signs of hazards, including gas kicks (uncontrolled influxes) or over-pressurized zones, to prevent blowouts. Reporting and Documentation: Create, update, and maintain detailed, accurate logs and reports (e.g., mud log, daily geological report) that correlate depth, lithology, and hydrocarbon shows. Equipment Maintenance: Rig up, calibrate, and perform routine maintenance on sensors, gas analyzers, and computerized data logging systems. Wellbore Integrity: Monitor hole and pipe displacements, such as during "trips" (moving the drill string in/out of the hole), to ensure well stability. Commonly Used Tools & Techniques: Binocular Microscopes for visual lithology classification. Ultraviolet (UV) fluorescence scanners to detect hydrocarbons. Gas chromatography and total gas analyzers. Data logging software to record geological and engineering data.

Overall welltesting opération DST TCP TDA DAQ PVT SUPERVISOR DST-TCP-TDA-DAQ-PVT Supervisor Algeria Schlumberger SONATRACH-GAZPROM -PTTEP-BP-ROSNEFT-REPSOL-ENI-TOTAL Jan 2016 Mar 2024 96 Month DST supervisor and testing jobs full package as Field Supervisor on drilling rigs (onshore) in combination with well intervention techniques which includes Coiled Tubing, Wireline, Slick line Frac, Underbalanced/Overbalanced, Acid using IRDV-AB-BA-CA,PCT-F-G and mechanical packers (7” 4.5” and 9.625” ) full autonomy in pressure testing all DST equipment Strong knowledge of Surface Well test Operations during Flowing and Flaring Operations DDA supervisor, execution, and maintenance as data acquisition as leader using downhole gauges (unigauges-signature gauges) with completion of field and final report delivered to client RSA bottom hole Sampling jobs supervisor using SRS SLS with transfer at wellsite in single phase sampling bottles using FTU, in flow insurance. maintenance of Sampling tools and oil and gas sampling bottles (Proserb), Surface sampling using CSB GSB (oil and gas samples) TCP Operations , including gun loading, and using mechanical and hydraulic firing heads (HDF/BHF) and various accessories ,SXAR TCR Guns release and production valves preparation. Calculations to prepare for a successful job: Job design reviewed against technical specification and well conditions. Field Operations: from job preparation to job closure Function and Pressure Test SDP preparation Well site preparation. Execution as per Client program Job closure Casing test with 7’’-9.625’’RTTS packer, 7’’- 5’’ circulating valve, 5’’-Safety safety joint.

Mud Logging, Monitoring, Working on Auto Calcimeter Core Logging On Site Management: Supervision, Field Work: Experienced in executing fieldwork, encompassing sample collection and data analysis. Data Analysis: : Skille Skilled in statistical analysis, data visualization, and interpretation relevant to geological surveys. Geological Technical: Proficient in utilizing GIS, CoreIDRAW and GeoRose. Geological and Structural Mapping Problem Solving MS Office As a dedicated Master of Science student specializing in Geology, I possess a strong comprehension of geological principles and a profound enthusiasm for my field. My goal is to employ my academic knowledge and practical skills in a professional setting, contributing significantly to the field of earth sciences. I aspire to start a career in Oil Field Services and Mining, utilizing my expertise to address crucial challenges within these domains.

I’m a motivated Mechanical Engineer who graduated from the University of Engineering & Technology, Peshawar in 2024. I bring hands-on field experience in oil & gas drilling and maintenance, gained as a Trainee Drilling Engineer with CCDC on Rig 27, 29, and 31 in Sindh. On the rigs, I worked directly on drilling and casing operations, including a 3800-meter well that led to a hydrocarbon discovery. My responsibilities included rig down operations, fishing jobs to retrieve lost tools, perforation, BOP systems, daily operational reporting, and crew coordination under high-pressure conditions. I learned to troubleshoot complex drilling issues and ensure safety compliance across all tasks. Alongside drilling, I have strong maintenance experience from Nashpa and Chanda Oil Fields. There I handled gas compressors, centrifugal and diaphragm pumps, CAT engine maintenance, lubrication systems, and pressure-related troubleshooting. I also served as an Operation & Logistics Manager, managing procurement, inventory, and supply chain for construction projects. My technical toolkit includes AutoCAD, CREO Parametric, SAP ERP, and MS Office, supported by strong soft skills in team leadership, problem solving, and communication. I thrive in fast-paced environments and focus on optimizing processes while maintaining safety and efficiency. I’m eager to bring my field knowledge, technical skills, and commitment to continuous learning to a dynamic oil & gas team where I can contribute and grow.

Lead Operations Specialist & Field Coordinator • Operational Logistics & Mobilization: Direct and oversee the strategic mobilization of specialized equipment and personnel, ensuring all logistics align with client timelines and project specifications for seamless site arrivals. • Engineering Collaboration: Partner closely with drilling and production engineers to facilitate technical equipment selection, ensuring all hardware is optimized for specific wellbore conditions and mission objectives. • Site Integration & Layout: Lead on-site coordination with client representatives and third-party contractors to manage precise equipment spotting and layout design, maximizing operational efficiency and footprint safety. • Technical Reporting & Documentation: Author comprehensive daily operational reports tailored to client requirements, providing transparent data on progress, KPIs, and field challenges. • Asset Integrity Management: Execute rigorous preventive and corrective maintenance programs to ensure 100% equipment uptime and peak performance in demanding environments. • Instrumentation & Data Systems: Oversee the installation, calibration, and function testing of sophisticated data acquisition tools and sensors. This includes the expert management of industry-standard software suites such as Edge, Scandas, and Fardux to ensure high-fidelity data capture. • Leadership & HSE Advocacy: Serve as the primary safety lead for both onshore and offshore operations, fostering a culture of zero-incident performance by strictly enforcing company and client HSE protocols and regulatory standards.